Recent Mold Remediation Posts
Salvaging Art After Mold Damage
When an environment contains an excessive amount of moisture, mold is a possibility.
Salvaging Art After Mold Damage
When an environment contains an excessive amount of moisture, mold is a possibility. It can grow on anything, particularly if it is made of cellulose fibers. The paintings in your home in Peoria, AZ are not exempt from potential fungus growth. All is not lost, though. Most of the time, paintings can be saved through mold cleaning.
When you need to restore a piece of art, it is best to leave it to the professionals. There are several benefits of hiring mold remediation experts to save your paintings:
- They have specialized training to do the job right.
- They know how to prevent the mold from returning.
- They are typically insured to protect your property.
Experts can assess what needs to be done and set reasonable expectations. They can give you an estimate of how long the mold cleaning and restoration is going to take and what it's going to cost. They are your best shot at salvaging your art piece.
Water is one of mold's favorite things. Therefore, the first thing that the technicians will probably do is dry out the canvas as much as possible, using methods that protect the painting from fading. After drying, some of the mold may be able to be brushed off the surface with a soft brush. It is less complicated to remove mold from the back of the painting rather than the front, but professionals have processes for doing both. Once all the mold damage is removed, the painting must be dried again so that new patches of fungus don't grow on it.
Once your painting has undergone mold cleaning and has been dried and protected from further growth, it can be returned to your home where it belongs. If a piece of art in your home molds, don't despair and don't throw it away. Enlist the help of certified professionals to save it.
Mold Damage Best Assessed By Pros
Mold in home
Mold Damage Best Assessed By Pros
Mold damage isn't something people anticipate having to deal with. Mold exists everywhere and is typically caused by excess moisture. A home or business could have a leaky pipe. Sometimes excess moisture or humidity causes mold growth behind wall, around the bath or near the sink.
Mold growth continues over the course of time and could produce foul smells, fungus and mildew. True mold removal that completely eliminates the source of the issue needs to be addressed by experienced specialists.
Mildew, fungus and the smelly odor associated with the mold damage can cause a brief panic. The most important step in mold removal is consulting a professional to assess the situation. A professional can provide things an individual at home will unlikely not be able to accomplish. Mold removal pro's can provide deodorization to knock out the smelly odor that accompanies mold growth.
Is mold removal something you can do at home or in your business?
Mitigation is a process best accomplished by those with experience to tackle it. Remediation of black mold by a restoration company can be the difference between short term or long term success. Mold in home and commercial mold damage are two different beasts to tackle. The underlying issues need to be addressed quickly to prevent any further damage. An expert who handles mitigation on a daily basis can provide you with a consultation concerning what will be entailed with the mold removal.
How do I remove this smelly odor?
The chances of a resident or business owner removing the smelly odor associated with mold damage is unlikely. Experts who take time to analyze the situation carefully can utilize professional grade equipment not available to the average person. They can also completely remove any mildew and fungus to prevent any future smelly odor.
Residents have to sleep overnight with the smelly odor. Deodorization can alleviate that concern quickly. High performance industrial grade machines can remove these smells with great ventilation techniques. Deodorization is an invaluable process which helps re-establish that new smell. This process helps with mold growth behind wall, around the bath or in other hidden areas.
How long will mitigation or remediation take?
Mitigation depends on several factors. Commercial mold damage could be more complex if other tenants or a landlord is involved. Mold in home could be more difficult to resolve if the person living in the dwelling is renting. The restoration process needs to happen as quickly as possible for all those involved. The safe removal of mold could prevent any further spread. It can prevent dry rot which leads to other issues.
Do I have other alternatives besides calling a restoration company?
Mold is something you should never take lightly. Whether it is commercial mold damage or mold in home, the spread can do great damage to the interior of any building. Black mold can cause severe damage. Remediation by experts can provide individuals with the peace of mind that the existing mildew and fungus is gone for good. The deodorization techniques utilized by a restoration company has been time tested to rid your home or business of any bad smells. Mold growth could continue to spread if left untreated or not treated properly by a professional. Black mold can also be substantial. It's very prevalent in wet areas like showers and tubs. Black mold thrives in dark and humid places.
The experts can assess everything quickly and remove the issues completely.
Visit http://www.SERVPROnorthwestphoenixanthem.com for more information on mold.
What You Need To Know About Mold Removal in Your Home
Mold can grow in a variety of places and conditions in your home.
Various types of mold growth, including black mold, can cause extensive damage to your home in Peoria, AZ, and the mold cleanup process can be costly. However, the more you are able to understand about mold growth and the removal process, the better you can prevent mold from growing.
What Causes Mold Growth?
Mold can grow in a variety of places and conditions in your home. However, there are several factors that make mold more likely to grow, including:
- Poor air circulation
- High levels of humidity
- Warm environments
Will Mold Go Away on Its Own?
Some people may believe that keeping an area where mold has grown dry will cause mold to disappear. Although there are several steps that can help to prevent mold, once mold has started to grow, it will not go away on its own. Instead, there are various steps that need to be taken for mold to be entirely eliminated.
How Is Mold Removed?
Different types of mold may require different methods of removal. Whereas black mold may require an extensive mold cleanup process, mold that has just started to grow in one area may be removed more quickly. Often, air filtration devices and anti fungal treatments are used to eliminate mold from a home.
How Can Mold Be Prevented?
Although it isn’t always possible to prevent mold growth, there are several steps that can decrease the likelihood of mold growing in your home, including:
- Keep your home dry by fixing leaks as soon as you notice them
- Eliminate any type of moisture problem in areas such as bathrooms or kitchens as soon as possible
- Don’t allow standing water to remain in your home
If you understand how mold grows and how mold is removed, you can take steps to prevent serious damage from black mold and other types of mold. If your home is experiencing issues with mold, you might want to consider contact mold remediation professionals.
Handling Mold Damage Quickly and Efficiently
Mold damage in an Anthem,AZ home
Flood waters, leaks, and inadequate seals around doors and windows all allow mold damage to become a real possibility. Mold in the home and commercial mold damage don’t discriminate, and mold growth doesn’t occur only after large quantities of water get into a building and sit for a while. Mold growth occurs quickly when humidity levels in a building are above 40 percent and any moisture is present. Mold damage spreads rapidly, and it can cause mold in the home or commercial mold damage to go from bad to extreme in fewer than three days.
What to Do When Commercial Mold Damage or Mold in the Home is Present
Mold removal must be handled by a restoration company that does mitigation and remediation. A restoration company has the right equipment and tools to handle mold removal as well as the side effects of mold growth. These tools get rid of the smelly odor using professional grade deodorization, and mitigation and remediation help business and homeowners learn how to prevent future mold growth.
Mitigation and remediation are required, and it’s imperative people don’t try mold removal on their own. For one, removing mold without the right equipment can send spores spiraling into the air and into the HVAC system where it can spread rapidly. It’s important to remove flood waters out of a home or office to minimize the risk of mold growth, fungus, mildew, and even dry rot. It also helps with the smelly odor of water damage, and it can be a natural form of deodorization.
It’s also helpful to shut off the HVAC to prevent further spread of this fungus into additional rooms. No one should touch mold. Black mold might be present, and it requires professional help to determine if it is.
Do Not Use DIY Methods of Mold Removal for Commercial Mold Damage or Mold in the Home
DIY methods to remove mold are dangerous, and this fungus will fight back. It spreads rapidly, and DIY attempts send spores into the air. It’s best to avoid DIY methods and focus on recognizing mold in the home. One of the most common signs of a potential mold issue is the presence of mildew. Like mold, mildew loves damp areas with warm, moist air. If mildew is growing, mold might also be growing.
Mold is fungus, and it can grow anywhere. This is important information since many people forget mold growth behind walls is common. If a leak occurs or flood waters aren’t properly dried, mold growth behind walls becomes a huge issue. Dry rot is one indication there is moisture in the walls. Dry rot isn’t a fungus, but it’s caused by excess moisture and often means there might be mold growth behind the walls.
In addition to dry rot, another common sign of mold growth behind walls is a smelly odor. It’s musty and a little damp, and deodorization efforts only cover up the smell for a short time. Calling for a professional restoration company to handle mitigation and remediation means having professional deodorization methods used to remove the smelly odor completely. This is one of the biggest benefits of using a professional restoration company since many people are sensitive to smells.
Black mold isn’t always easy to see, and some mold is black mold but not the toxic kind. Mitigation and remediation help home and business owners get the mold damage mess cleaned up, find the source of the mold, and even prevent future mold issues from becoming a problem. It’s not something people do when they can’t get rid of mold on their own. It’s something people do when they want to save money and have mold damage handled correctly from day one. There is no time to waste when mold is a problem.
3 Steps for Media Blasting: Eliminate Mold Under Your Home
Over time, flooding and wet weather can cause mold to grow under your home, which can damage the structure and create unpleasant odors.
If your Phoenix, AZ, home has a crawlspace, you may already know that it can be prone to moisture damage. Over time, flooding and wet weather can cause mold to grow under your home, which can damage the structure and create unpleasant odors. However, professional cleaning techniques, such as media blasting, can remove mold from this area in a safe and permanent manner.
1. Determining the Mold Problem
Once you call in a mold damage and remediation service, the technicians will likely come to gauge the severity of the problem before they begin the blasting. They may inspect the entire area within the crawlspace to determine how far the mold has spread and what type they are dealing with. This preliminary exam can help them exterminate the fungi with more efficiency.
2. Preparing the Media
Next, your mold techs will probably explain how they will eliminate the mold with media blasting. In most cases, mold blasting is performed with baking soda. Not only is this more effective than using bleach or other water-based chemicals, it is also safer for people, pets and the environment. The techs will used pressurized spray machines to blast away the mold, which can also be more efficient than scrubbing it away by hand.
3. The Spraying Process
Once the blasting begins, the treatment can take up to several hours, depending on the severity of the mold growth. The baking soda can remove mold from wood and other surfaces without leaving any lasting damage. Afterward, your techs will likely clean the area and remove any excess media. Once the treatment is complete, you may get a report on the results and whether your home might need future treatments.
Your Phoenix, AZ, home’s crawlspace can house important systems like your fuse box or HVAC controls. Soda blasting can protect these components and the rest of your home from the serious damage mold can do. For more information, visit http://www.SERVPROnorthwestphoenixanthem.com/.
Is It Possible to Clean a Moldy Washing Machine?
Give SERVPRO a call if you experience mold damage in your home.
When your clothing starts to smell sour no matter how many times you wash it or change laundry detergent, the most likely culprit is the washing machine itself. Your washing machine can actually grow mold inside, a hazard of any appliance that frequently has water running through its chambers and pooling in cracks and crevices. Mold smell is terrible, and isn’t limited to the great outdoors of Phoenix, AZ. Read on to find out how to get rid of that smell without airing your dirty laundry.
Turn to Household Goods
Even if you’re worried the smell is permanent, all isn’t lost. You can use common household goods to get rid of the smell and kill the mold.
• Baking soda: Baking soda is an age-old cure for odor absorption and removal. Mix a little with water in a 1:4 ratio and run it through in lieu of detergent.
• Vinegar: Vinegar can not only get rid of smells, but help to kill the mold when mixed with the baking soda. Put the vinegar directly into the washing machine’s drum and run it through on a normal cycle at high heat.
• Oxygen-based cleaners: Many oxygen-based cleaners can clean the mold away and eliminate the smell. Find out which ones are safe to use with your washing machine.
• Bleach: Bleach can be a last resort, when sometimes it can make the smell worse and can linger in your washing machine, risking stains.
Apply a Little Elbow Grease
Don’t be afraid to get a little down and dirty. Even after running cleansers through the cycle, you’ll need to get inside and scrub. Shine a flashlight inside the drum of your washing machine and pick out any remaining spots of mold. Apply a little elbow grease to scrub them away, and afterward make sure to keep the drum dry.
For Prevention, Change Detergents
Your detergent may be encouraging mold to grow. If you don’t want to hire professionals or throw your washer out completely, you may need to give up your favorite scent for something less prone to encouraging mold growth. Visit http://www.SERVPROnorthwestphoenixanthem.com for more information on mold.
Most Popular FAQs About Mold
With black mold turning up in so many articles in recent years, it’s not surprising that people have so many questions about water damage, mold growth and mold remediation in Phoenix, AZ. Read on to find out answers to some of the most popular questions about this common problem.
1. What Does Mold Need To Grow?
Like all living organisms, mold needs water and nutrients to grow. Mold spores are carried in the air and are found nearly everywhere. When a spore lands in a location with good conditions it will grow into a visible colony. Because the fungus can get nutrients from almost anything, including wood, paper and organic debris found in dust, moisture determines were mold grows on your property.
Flooding, burst pipes and leaks can all result in water damage that lingers for a long time after the event. When materials remain damp for more than 48 hours, mold can begin to grow.
2. At What Humidity Does Mold Thrive?
In climates with high humidity, atmospheric moisture can sometimes be sufficient to encourage mold growth. To keep mold under control, humidity should be kept below 60 percent, at least. Below 50 percent is ideal.
3. What Is the Process for Mold Remediation?
If you require professional mold remediation in Phoenix, AZ, there are several steps. First, an expert will assess the situation in your building and create a plan. Next, the affected areas are contained. Moldy materials are either cleaned and disinfected or removed from the property and disposed of. Finally, the area is dried completely and then restored to its original condition.
4. Can You Stay Around During Mold Remediation?
It depends on the extent of the mold growth. If mold is confined to a smaller area, it will be contained and it is perfectly safe to be elsewhere in the building. If most of the property is affected, the whole structure may need to be contained and you may be required to relocate during the cleanup.
For more information about commercial mold remediation, visit http://www.SERVPROnorthwestphoenixanthem.com/.
3 Ways To Tell Mold From Mildew After a Flood
The basement pictured here suffered a serious mold loss due to moisture left over when a pipe burst.
Finding evidence of mold damage in your Phoenix, AZ home can be a cause for concern. However, you may not be able to discern if the damage was the result of mold or if you are dealing with mildew. There are several differences between the two, and understanding how they differ can help you proceed with cleanup efforts after a flood.
While mold and mildew are both fungi, mildew growth can be identified by its texture. Unlike mold, mildew is often thin and scummy and can be wiped away easily, where most mold species are typically fuzzy and harder to remove. If what you see is fuzzy, then you are probably dealing with a mold problem.
Mold comes in many different colors, which range from brown to green to black. Mildew, however, tends to look more greyish instead of growing in vibrant colors. Mold damage on walls and furniture after a flood or plumbing mishap will likely be green or a mixture of white and green, and its cleanup should be left to a professional storm cleanup and mold remediation company.
3. Spread Pattern
Both mold and mildew can spread. However, mold growth tends to be more aggressive in its spread pattern and can move quickly from one surface to another in the space of several days. Mold spores in the air can attach to almost any surface capable of feeding it, including wood, fibers and cardboard. If your home has been damaged by water and you see black or green spots on your belongings, this is probably mold, not mildew, and it may require immediate remediation.
It can be hard to differentiate mold damage from mildew after your Phoenix, AZ home suffers water damage. However, knowing how to tell the difference between the two can help you understand what kind of assistance you need to eradicate either of these funguses quickly. Visit http://www.SERVPROnorthwestphoenixanthem.com for more information on mold.
Understanding the Odor Associated With Mold
Most people are familiar with the musty odor associated with mold. For business owners in Rio Vista, Arizona, a terrible smell can be bad for business. Even though people are familiar with this scent, they may incorrectly associate smells with mycotoxin and spores. Hiring the right mold remediation experts may help you learn more about mold, its odors and how you can eliminate the issue.
Where Does It Come From?
Many people associate mold spores with a musty smell. However, that is not exactly right. The smell comes from compounds being released by the fungus. In fact, when the mold is growing, it produces excretions in the form of microbial volatile organic compounds. Spores are usually released after the mold has used up its moisture source, so it is no longer actively growing. These smell-producing chemicals are most often released when the fungus does the following:
Some microbial volatile organic compounds could fall into the category of mycotoxin, which is any toxic substance produced by a fungus. However, not all scent-producing compounds released by mold are toxic.
How Can It Be Managed?
During the cleanup, professionals may incorporate a HEPA Air Filtration Device to help block the smells of mildew. These filtration machines have extremely fine filters that can actually trap the compounds and spores released by mold. This means no matter what stage the fungus is in, the HEPA Air Filtration Device can help stop the spread of spores or smells. Most business owners want to get to the heart of the mold issue to ensure the smell does not keep coming back. If you fall into this category, you will need to have the physical signs of mold removed to ensure the smell cannot easily return.
Managing the musty odor caused by the release of mycotoxin and other microbial volatile organic compounds requires some elbow grease. Complete mold remediation is one of the only ways to really remove the smell.
For more information on mold visit us at http://www.SERVPROnorthwestphoenixanthem.com.
Finding Black Mold in Phoenix, AZ
Finding black mold in your home can be scary. Remember, it never hurts to educate yourself, especially when it comes to any water damage to your home. Click on the links below to educate yourself on black mold and the effects black mold or any mold can have on you or your home.
In most cases if you have microbial growth in your home, give us a call and we will call in an environmental hygienist to test the growth. After the results come in we will have a detailed plan for treatment.
SERVPRO of NW Phoenix/Anthem is always here to help with all of your water cleanup, mold cleanup, or fire cleanup. Give us a call today and let us help! 623-780-9111
Mold Remediation Services
Mold becomes a problem inside a home or business when there's excessive humidity or moisture for an extended period of time. The problem can originate from sudden water releases, like a burst pipe or large spill that goes untreated, or from a chronic condition, such as a leaking roof or plumbing. Even high humidity or warm, moist air condensing on cool surfaces can trigger mold problems. It's always best to have the mold evaluated and removed by a certified professional.
Certified professionals have the training and experience to:
- Identify moisture sources
- Evaluate mold growth (visible or suspected)
- Contain damage to the smallest area possible
- Physically remove contamination
- Dry materials to ensure that mold will not return
- Perform or recommend procedures for returning property to a preloss condition
Finding mold in your home
How to spot mold growth
Mold can grow almost anywhere in a home or business if conditions permit. If there is visible growth on painted wall surfaces, property owners should be concerned about what may be growing on the wall's opposite side.
The environment inside the walls of a house often differs drastically from the outside and could create a perfect haven for mold. If the wall remains wet for a prolonged period, it's almost guaranteed that the mold growth on the backside will be worse than on the front.
At that point, containing the work space and removing moldy building materials, followed by cleaning of salvageable framing, are the best options.
Call SERVPRO of Northwest Phoenix/Anthem if you believe you have a mold problem.
Mold Cleanup in Homes and Businesses
Mold growing up the drywall
SERVPRO of Northwest Phoenix/Anthem can help you with all you mold mitigation needs. Our technicians are certified and trained in mold damage mitigaiton.
SERVPRO of Northwest Phoenix/Anthem is also partnered with quailified indoor environmental professionals to make sure that the area has been properly cleaned prior to the repairs taking place.
While yes, we do live in the desert, your property still has the potential to allow for mold growth if water damaged building materials are not mitigated properly.
Call SERVPRO of Northwest Phoenix/Anthem at 623-780-9111
Why does mold grow in my home?
Mold growing throughout the house.
Mold is a decomposer and is always present in every home.
Mold is always growing and sending out thousands of spores into the air. Mold is more prevalent after a rain storm in the Arizona area since we live in a desert.
The mold from outside is tracked into our homes though open windows, pets, and wind. There is never a way to be rid of mold spores. That is the reason why mold will grow in your home after a water damage from a broken pipe or supply line.
The mold spores in your home will start to grow as soon as moisture is introduced. But SERVPRO of NW Phoenix/Anthem is always here to help with all of your water cleanup and mold cleanup needs. Give us a call today and let us help! 623-780-9111
Water Damage Cleanup
Educate yourself on the steps to take to prevent mold.
Click on the link below to learn more about mold and the effects it may have. Call our office today for more information on what we can do to help you take care of a water damage or mold damage in your home.
If it is too late and you have already discovered mold growth call SERVPRO of NW Phoenix & Anthem today.
Mold Cleanup Services
Mold damage to a vacant home. The homeowner did not know they had water damage and then it was too late.
Having water damage to your home or business can be stressful. Timing is of the essence for water damage cleanup. Mold can start forming within as little as 72 hours. If you have water damage to your home call or email SERVPRO of NW Phoenix & Anthem today and let us help.
Mold Cleanup Phoenix, AZ
Mold Mitigation needed on laundry room wall.
SERVPRO of Northwest Phoenix/Anthem is certified to help you with all your mold mitigation needs.
We are partnered with third party consultants to advise on the mold mitigation protocol as needed. SERVPRO of Northwest Phoenix/Anthem will also work directly with you insurance carrier for all billing needs during the project.
Call SERVPRO of Northwest Phoenix/Anthem today to help you with your mold mitigation project.